IES-2000/3000 User’s Guide
System Maintenance 2 26-3
ii. When the VLC1012 boots up and there is a time server configured in menu 24.10.
iii. 24-hour intervals after starting.
26.3 Remote Management Control
Remote management control is for managing Telnet, Web, FTP and ICMP services. You can customize the service
port and the secured client IP address to enhance security and flexibility.
To disable remote management of a service, select Disable in the corresponding Server Access field.
Enter 11 from menu 24 to bring up Menu 24.11 – Remote Management Control.
Figure 26-3 Menu 24.11 – Remote Management Control
Table 26-2 Menu 24.11 – Remote Management Control
FIELD DESCRIPTION EXAMPLE
TELNET/FTP/Web/IC
MP Service
Press the [SPACE BAR] to select Enable and then press [ENTER] to
allow remote Telnet, FTP, Web and/or ICMP service.
Enable
Service Port Many residential broadband ISP accounts do not allow you to run any
server processes (such as an FTP server) from your location. If you
wish to run such a server from your location, you must change the
default service port number. Type in the new service port number here
that corresponds to the new port number you configured on the server.
23
Edit Secured Clients Secured clients are trusted computers that may access the defined
services on the VLC1012. Press [SPACE BAR] once to select Yes and
then press [ENTER] to go to SMT Menu 24.1.1 – Secured Client Sets.
No
Once you have filled in this menu, press [ENTER] at the message "Press ENTER to Confirm or ESC to Cancel" to
save your configuration, or press [ESC] to cancel.
26.3.1 Secured Client Sets
Press [SPACE BAR] once in the Edit Secured Clients field (menu 24.11) to select Yes and then press [ENTER]
to go to SMT Menu 24.1.1 – Secured Client Sets. This is a read-only menu.
Menu 24.11 — Remote Management Control
Service Access:
TELNET service= Enable
Server Port= 23
FTP Service= Enable
Server Port= 21
Web Service= Enable
Server Port= 80
ICMP Service= Enable
Edit Secured Clients= No
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
To Next Page
Loading...
