IES-2000/3000 User’s Guide
28-12 Switch-Related Commands
Figure 28-10 Clear One Port of All Egress Ports
Clear All Ports of All Egress Ports
Syntax:
sw vlan clear all
Use this command to clear all ports of all egress ports.
sw vlan clear all
Clears all ports of all egress ports.
Enter
sw vlan status to see the result of this command.
Figure 28-11 Clear All VLAN Ports
28.5 MAC Address Commands
The following commands allow ports to learn MAC addresses and display information about MAC addresses
learned. MAC address learning reduces the need for outgoing traffic broadcasts.
VLAN map:
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Port 0: O X X X X X X X X X X X X X X
Port 1: — O — — — — — — — — — — — — -
Port 2: X X O X X X X X X X X X X X X
Port 3: X X X O X X X X X X X X X X X
Port 4: X X X X O X X X X X X X X X X
Port 5: X X X X X O X X X X X X X X X
Port 6: X X X X X X O X X X X X X X X
Port 7: X X X X X X X O X X X X X X X
Port 8: X X X X X X X X O X X X X X X
Port 9: X X X X X X X X X O X X X X X
Port10: X X X X X X X X X X O X X X X
Port11: X X X X X X X X X X X O X X X
Port12: X X X X X X X X X X X X O X X
Port13: X X X X X X X X X X X X X O X
Port14: X X X X X X X X X X X X X X O
Where 'O' means the port itself, 'X' means its VLAN member, and '-' is not VLAN
member.
VLAN map:
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Port 0: O — — — — — — — — — — — — — -
Port 1: — O — — — — — — — — — — — — -
Port 2: — — O — — — — — — — — — — — -
Port 3: — — — O — — — — — — — — — — -
Port 4: — — — — O — — — — — — — — — -
Port 5: — — — — — O — — — — — — — — -
Port 6: — — — — — — O — — — — — — — -
Port 7: — — — — — — — O — — — — — — -
Port 8: — — — — — — — — O — — — — — -
Port 9: — — — — — — — — — O — — — — -
Port10: — — — — — — — — — — O — — — -
Port11: — — — — — — — — — — — O — — -
Port12: — — — — — — — — — — — — O — -
Port13: — — — — — — — — — — — — — O -
Port14: — — — — — — — — — — — — — — O
Where 'O' means the port itself, 'X' means its VLAN member, and '-' is not VLAN
member.
To Next Page
Loading...
