IES-2000/3000 User’s Guide
Bridge Commands 10-9
Port 16 (dsl15): 1
Port 17 (dsl16): 1
Port 18 (dsl17): 1
Port 19 (dsl18): 1
Port 20 (dsl19): 1
Port 21 (dsl20): 1
Port 22 (dsl21): 1
Port 23 (dsl22): 1
Port 24 (dsl23): 1
Port 25 (dsl24): 1
The following figures illustrate the above example. Notice that ports 2 (DSL port 1) and 3 (DSL port 2) are
able to communicate with each other, as well as with the Ethernet. All of the other ports will only be able to
communicate with the Ethernet uplink port.
The following figure illustrates the
192.168.1.1 bridge> portfilter 2 1 3
command line. Port 2 (DSL port 1) is able to send to both the Ethernet uplink port and port 3 (DSL port 2).
Figure 10-2 Example of Modified VLAN Port 2
The following figure illustrates the
192.168.1.1 bridge> portfilter 3 1 2
command line.
Port 3 (DSL port 2) is able to send to both the Ethernet uplink port and port 2 (DSL port 1).
To Next Page
Loading...
