IES-2000/3000 User’s Guide
Firmware and Configuration File Maintenance 25-13
Step 2. After the "Starting Xmodem upload" message appears, activate the Xmodem protocol on your computer.
Follow the procedure as shown previously for the HyperTerminal program. The procedure for other serial
communications programs should be similar.
Step 3. Enter “atgo” to restart the VLC1012.
25.4.11 Example Xmodem Configuration Upload Using HyperTerminal
Click Transfer, then Send File to display the following screen.
Figure 25-19 Example Xmodem Upload
After the configuration upload process has completed, restart the VLC1012 by entering “atgo”.
Type the configuration file’s
location, or click Browse to search
for it.
Choose the Xmodem protocol.
Then click Send.
To Next Page
Loading...
