ZyXEL Communications IES-2000 - Figure 27-6 VDSL Quality Counters

IES-2000/3000 User’s Guide
27-8 VDSL-Related Commands
27.2.11 VDSL Quality Command
Syntax:
vdsl quality chan-id
Use this command to view error counters on your VDSL link.
Figure 27-6 VDSL Quality Counters
Refer to Table 27-5 for more information on these fields.
27.2.12 VDSL Debug Command
Syntax:
vdsl debug chan-id [on|off]
This command turns the VDSL auto flag on or off. When this flag is on, the VLC1012 displays each stage (state)
of the VDSL link initialization process. When the VDSL link is up, no messages are displayed until the VDSL
line is disconnected.
vlc-1012> vdsl quality vdsl01
US US US US US DS DS DS DS DS
CHAN Lnk RATE SNR MSE TXPWR RSERR RATE SNR MSE TXPWR RSERR
Mbps dB dB dbm/Hz Mbps dB dB dbm/Hz
vdsl01 Dn 1.56 0.00 0.00 0.00 0 4.17 0.00 0.00