IES-2000/3000 User’s Guide
Switch-Related Commands 28-1
Chapter 28
Switch-Related
Commands
This chapter shows you how to configure your VLC1012 using switch-related commands.
28.1 Overview
The following table is an overview of the MIB, port and VLAN switch-related CI commands.
Table 28-1 MIB, Port and VLAN Switch Command Summary
COMMAND DESCRIPTION EXAMPLE
sw mib status
Use this command to see the port n mib counters.
sw mib status n
sw mib clear
Use this command to clear port n of mib counters.
sw mib clear n
sw port status
Use this command to see the link status of all ports.
sw port status
sw vlan status
Use this command to view all VLAN settings.
sw vlan status
sw vlan set
Use this command to set port(s) x1, x2, etc. to be the egress
port(s) (outgoing ports) for port “n”.
sw vlan set n, x1, x2
sw vlan clear
Use this command to clear the VLAN setting of port n.
sw vlan clear n
28.2 Switch MIB Commands
The following are the most common MIB CI commands.
28.2.1 MIB Status Command
Syntax:
sw mib status n
This command allows you to view the MIB of port n where n is a port number.
sw mib status 13
Displays the MIB of port 13 as follows:
To Next Page
Loading...
