IES-2000/3000 User’s Guide
8-6 SLC1024 Specific Commands
<name> =
The name of the profile (up to 18 characters except DEFVAL).
<Cmax> =
The maximum transmission rate.
<Cmin> =
The minimum transmission rate. This setting is optional. 192 Kbps is the
default if you do not configure a value for this parameter.
Configure <Cmax> and <Cmin> parameters between 192 and 2304 Kbps.
Speed Configuration
Even though you can specify arbitrary numbers for port speeds using the set profile command, the
SLC1024 port speed is always adjusted to be a multiple of 64 Kbps. If you enter a speed that is not a multiple of
64 Kbps, the SLC1024 will use the next lower multiple of 64 Kbps. For instance, if you specify 600 Kbps for a
port, the SLC1024 port will not exceed 576 Kbps; if you specify 660 Kbps, the SLC1024 port will not exceed 640
Kbps. See the examples shown next.
Example 1:
The configuration
192.168.1.1 gshdsl> set profile economy 2000 200
sets the speeds for the economy profile between 1984 and 192 Kbps.
Example 2:
The configuration
192.168.1.1 gshdsl> set profile economy 800 800
sets the speeds of the economy profile at 768 Kbps.
8.5.11 Delete Profile Command
Syntax:
192.168.1.1 gshdsl> delete profile <name>
where
<name> = The profile name.
The delete profile command allows you to delete an individual profile by its name.
8.5.12 List Profiles Command
Syntax:
192.168.1.1 gshdsl> list profiles
To Next Page
Loading...
