IES-2000/3000 User’s Guide
9-2 10/100M Fast Ethernet Port Commands
9.2.3 Set Speed Command
Syntax:
192.168.1.1 ethernet> set speed <speed>
where
<speed> = 10 or 100
This command sets the connection speed used when auto-negotiation is turned off. 10 stands for 10Mbps and
100 stands for 100Mbps.
9.2.4 Status Command
Syntax:
192.168.1.1 ethernet> status
This command shows the current status of the Ethernet uplink port.
To Next Page
Loading...
