IES-2000/3000 User’s Guide
Bridge Commands 10-11
<vid> =
The tag number (or IEEE 802.1Q identification) that identifies the source port of an
Ethernet frame. Allocate tag numbers for all logical ports on your line card.
This command lets you allocate IEEE 802.1Q identification numbers (tags) on a port-by-port basis.
The command 192.168.1.1 bridge> fpvid displays the default port identification of all line card
ports.
The IEEE 802.1Q standard uses an explicit tag in the header to specify the VLAN ID (VID) of an Ethernet frame.
In this way, the VLAN membership of a frame can be carried across switches. The following table displays the
physical port and corresponding default PVID (Port VLAN ID) tag on the line card.
To Next Page
Loading...
