IES-2000/3000 User’s Guide
Remote Management 14-5
<community> =
The password used by the line card to authenticate itself to the trap server.
<IP addr> =
The IP address of the trap server.
This command adds a trap server.
14.4.3 Trap Delete Command
Syntax:
trap delete <community> <IP addr>
This command deletes a trap destination. The parameters are the same as the trap add command.
14.4.4 Trap Flush Command
Syntax:
trap flush
This command deletes all trap destinations.
14.4.5 Trap List Command
Syntax:
trap list
This command lists all the trap destinations.
To Next Page
Loading...
