ZyXEL Communications IES-2000 - Page 94

IES-2000/3000 User’s Guide
7-6 ALC1024 Specific Commands
Total Transceiver Output Power : 8dB
Current ATUR Information:
Country code 0
Provider Code 01020304
Capabilities:
g.dmt POTS overlap (Annex A)
The results contain the operating modes, interleave delay, parity byte assignment, parity bytes per codeword,
symbols per codeword and interleave depth. Current ATUR Information displays data acquired from the
ATUR (stands for ADSL Termination Unit – Remote, in this case the user’s ADSL modem or router) during
negotiation/provisioning message interchanges. It includes the Vendor ID and Version Number obtained from
Vendor ID fields (g.994.1) or R-MSGS1(T1.413) and country code from Vendor ID (g.994.1).
Information obtained before training to steady state transition will not be valid or old. Annex A refers to POTS.
7.5.8 Lineperf Command
Syntax:
192.168.1.1 adsl> lineperf <port number>
where
<port number>
= A port number, from 1 to 24.
The lineperf command shows the line performance counters of an ADSL port.
An example is shown next.
192.168.1.1 adsl> lineperf 7
nfebe-I/nfebe-ni : 0/0
ncrc-I/ncrc-ni : 0/0
nfecc-I/nfecc-ni : 0/0
nfec-I/nfec-ni : 0/0
nblks-ds/nblks-us : 120878/120878
nsec-ds/nsec-us : 2060/2060
n-eb-ds/n-eb-us : 0/0
n-bbe-ds/n-bbe-us : 0/0
n-es-ds/n-es-us : 0/0
n-ses-ds/n-ses-us : 0/0
non-ses-blks-ds/non-ses-blks-us : 120878/120878
n-uas-ds/n-uas-us : 0/0