ZyXEL Communications USG FLEX H Series - Page 104

Chapter 7 Interfaces
USG FLEX H Series User’s Guide
104
Status This icon is lit when the entry is active and dimmed when the entry is inactive.
Name This field displays the name of the interface.
Description This field displays the description of the interface.
IP/Netmask This field displays the current IP address and the subnet mask of the interface. If this field is
empty, the interface does not have an IP address yet.
Type This field displays the interface type.
Ports This field displays the port the interface is using.
Internal
Add Click this to add a new entry.
Edit Select an entry and click Edit to open a screen where you can modify the entry’s settings.
Remove To remove a virtual interface, select it and click Remove. The Zyxel Device confirms you
want to remove it before doing so.
Status This icon is lit when the entry is active and dimmed when the entry is inactive.
Name This field displays the name of the interface.
Description This field displays the description of the interface.
IP/Netmask This field displays the current IP address and the subnet mask of the interface. If this field is
empty, the interface does not have an IP address yet.
Type This field displays the interface type.
Ports This field displays the port the interface is using.
Bridge
Add Click this to add a new entry.
Edit Select an entry and click Edit to open a screen where you can modify the entry’s settings.
Remove To remove a virtual interface, select it and click Remove. The Zyxel Device confirms you
want to remove it before doing so.
Status This icon is lit when the entry is active and dimmed when the entry is inactive.
Name This field displays the name of the interface.
Description This field displays the description of the interface.
IP/Netmask This field displays the current IP address and the subnet mask of the interface. If this field is
empty, the interface does not have an IP address yet.
Members This field displays the Ethernet interfaces and VLAN interfaces in the bridge interface. It is
blank for virtual interfaces.
VTI
Edit Select an entry and click Edit to open a screen where you can modify the entry’s settings.
Status This icon is lit when the entry is active and dimmed when the entry is inactive.
Name This field displays the name of the interface.
Description This field displays the description of the interface.
Local Address This field displays the Zyxel Device IP address of the interface that is connected to the
remote IPSec VPN router.
Remote Address This field displays the IP address of the remote IPSec VPN router.
VPN Rule This shows the name of the associated IPSec VPN rule with VPN Tunnel Interface application
scenario.
Reference This field displays which settings use the entry.
Table 60 Network > Interface > Interface
LABEL DESCRIPTION