Chapter 5 Monitor
USG FLEX H Series User’s Guide
77
5.10 The SSL Inspection Screens
The Zyxel Device uses SSL Inspection to decrypt SSL traffic, then sends it to Security Service engines for
inspection, and then finally encrypts traffic that passes inspection and forwards it.
5.10.1 The Summary Screen
Click Security Statistics > SSL Inspection > Summary to display the following screen. This screen shows the
number of SSL sessions inspected, blocked and passed.
Figure 65 Security Statistics > SSL Inspection > Summary
The following table describes the labels in this screen.
Source IP This column displays when you display the entries by Source IP. It shows the source IP
address of virus-infected files that the Zyxel Device has detected.
Destination IP This column displays when you display the entries by Destination IP. It shows the
destination IP address of virus-infected files that the Zyxel Device has detected.
Apply Click Apply to save your changes back to the Zyxel Device.
Reset Click Reset to return the screen to its last-saved settings.
Table 39 Security Statistics > Anti-Malware (continued)
LABEL DESCRIPTION
Table 40 Security Statistics > SSL Inspection > Summary
LABEL DESCRIPTION
General Settings
Refresh Click this button to update the report display.
To Next Page
Loading...
