ZyXEL Communications USG FLEX H Series - 1.4 Web Configurator

Chapter 1 Introduction
USG FLEX H Series User’s Guide
21
• Certificates
1.4 Web Configurator
The Web Configurator is an HTML-based management interface that allows easy system setup and
management through Internet browser. Use a browser that supports HTML5, such as Microsoft Edge,
Mozilla Firefox, or Google Chrome.
In order to use the Web Configurator you need to allow:
• Web browser pop-up windows from your device.
• JavaScript (enabled by default).
The recommended minimum screen resolution is 1366 x 768 pixels.
Note: Screenshots and graphics in this book may differ slightly from your product due to
differences in product features or Web Configurator brand style.
1.4.1 Web Configurator Access
1 Make sure your Zyxel Device hardware is properly connected. See the Quick Start Guide.
2 In your browser go to https://192.168.168.1. By default, the Zyxel Device automatically routes this request
to its HTTPS server, and it is recommended to keep this setting. The Login screen appears.
3 Type the user name (default: “admin”) and password (default: “1234”).
4 Click Login. After you log in for the first time using the default user name and password, you must
change the default admin password in the Update Admin Info screen. Enter a new password of from 1
to 64 characters.
Make a note of your new password, enter it in the following screen, then click Apply. The Login screen
appears again. Log in with your new password.