Chapter 21 IP Exception
USG FLEX H Series User’s Guide
315
•Anti-Malware
• URL Threat Filter
• IPS (Intrusion Prevention System)
• IP Reputation.
• DNS Threat Filter
21.2 The IP Exception Screen
Use this screen to view the IP exception list for the specified services. The Zyxel Device will not inspect
incoming packets that match the listed source and destination IP address(es) with the specified
services.
Click Security Service > IP Exception to display the following screen. Use Add to put a new entry in the list
or Edit to change an existing one or Remove to delete an existing entry.
Figure 195 Security Service > IP Exception
The following table describes the fields in this screen.
Table 157 Security Service > IP Exception
LABEL DESCRIPTION
Configuration
Add Click this to create a new entry.
Edit Select an entry and click this to be able to modify it.
Remove Select an entry and click this to delete it.
# This is the entry’s index number in the list.
Name This field displays the descriptive name of this entry.
IPv4 Source This field displays the source IP address (or address object) of incoming traffic. It displays any if
there is no restriction on the source IP address.
IPv4 Destination This field displays the destination IP address (or address object) of incoming traffic. It displays
any if there is no restriction on the destination IP address.
Service to Bypass This field displays which services will not inspect matched packets.
Log This field displays if the Zyxel Device will generate a log when the incoming traffic is in the
exception list.
To Next Page
Loading...
