ZyXEL Communications USG FLEX H Series - 4.3 The Security Screen

Chapter 4 Dashboard
USG FLEX H Series User’s Guide
62
4.2.6 The Latest Logs Screen
Figure 53 Dashboard > System > The Latest Logs
The table describes the fields in the screen.
4.3 The Security Screen
Use the Security screen to check security status information about the Zyxel Device.
Table 29 Dashboard > System > The Latest Log
LABEL DESCRIPTION
# This is the entry’s rank in the list of alert logs.
Time This field displays the date and time the log was created.
Category This field displays the type of log generated.
Message This field displays the actual log message.
Source This field displays the source address (if any) in the packet that generated the log.
Destination This field displays the destination address (if any) in the packet that generated the
log.
Priority This field displays the severity of the log.