ZyXEL Communications USG FLEX H Series - CHAPTER 5 Monitor; 5.1 Overview

USG FLEX H Series User’s Guide
65
CHAPTER 5
Monitor
5.1 Overview
Use the Monitor screens to check status and statistics information.
5.1.1 What You Can Do in this Chapter
Use the Monitor screens for the following.
• Use the System Statistics > Port (Section 5.2 on page 66) screen to view the packets statistics for each
port.
• Use the System Statistics > Interface (Section 5.3 on page 67) screen to view the packets statistics for
each interface.
• Use the System Statistics > Resource (Section 5.4 on page 67) screen to view the resource statistics.
• Use the Security Statistics > App Patrol (Section 5.5 on page 68) screen to view application statistics.
• Use the Security Statistics > Content Filter screen (Section 5.6 on page 69) to start or stop data
collection and view content filter statistics.
• Use the Security Statistics > Reputation Filter screens (Section 5.7 on page 71) to view statistics of IP
reputation, DNS threat filtering and URL threat filtering.
• Use the Security Statistics > IPS screen (Section 5.8 on page 75) to start or stop data collection and
view IPS statistics.
• Use the Security Statistics > Anti-Malware (Section 5.9 on page 76) screen to view anti-malware
statistics.
• Use the Security Statistics > SSL Inspection screen (Section 5.10 on page 77) to see a report on SSL
Inspection and a certificate cache list.
• Use the Security Statistics > Sandbox screen (Section 5.11 on page 79) to view sandbox statistics.
• Use the Network Status > Interface screen (see Section 5.13 on page 82) to view the interface packets
statistics.
• Use the Network Status > Session Monitor screen (see Section 5.13 on page 82) to view sessions by user
or service.
• Use the Network Status > Device Insight screen (see Section 5.14 on page 84) to view the status of the
clients connected to the Zyxel Device.
• Use the Network Status > Login Users screen (Section 5.15 on page 86) to look at a list of the users
currently logged into the Zyxel Device.
• Use the Network Status > DHCP Table screen (see Section 5.16 on page 87) to view a list of interfaces
and their DHCP-assigned IP addresses.
• Use the VPN Status > IPSec VPN > Site to Site VPN screen (Section 5.17.1 on page 88) to display and
manage active IPSec SAs.
• Use the VPN Status > IPSec VPN > Remote Access VPN screen (Section 5.17.2 on page 89) to display
and manage remote access VPN clients.