Chapter 24 System
USG FLEX H Series User’s Guide
387
Figure 237 System > Certificate > My Certificates > Import
The following table describes the labels in this screen.
24.8 Trusted Certificates
Click System > Certificate > Trusted Certificates to open the Trusted Certificates screen. This screen
displays a summary list of certificates that you have set the Zyxel Device to accept as trusted. The Zyxel
Device also accepts any valid certificate signed by a certificate on this list as being trustworthy; thus you
do not need to import any certificate that is signed by one of these certificates.
Table 192 System > Certificate > My Certificates > Import
LABEL DESCRIPTION
File Path Type in the location of the file you want to upload in this field or click Browse to find it.
You cannot import a certificate with the same name as a certificate that is already in the Zyxel
Device.
Browse Click Browse to find the certificate file you want to upload.
Password This field only applies when you import a binary PKCS#12 format file. Type the file’s password that was
created when the PKCS #12 file was exported.
OK Click OK to save the certificate on the Zyxel Device.
To Next Page
Loading...
