USG FLEX H Series User’s Guide
33
CHAPTER 2
Initial Setup Wizard
2.1 Initial Setup Wizard Overview
When you log into the Web Configurator for the first time or when you reset the Zyxel Device to its
default configuration, the Initial Setup Wizard screen displays. This wizard helps you configure Internet
connection settings and activate subscription services.
Note: You must register your Zyxel Device at Nebula Control Center (NCC) to use security
services and upgrade firmware. Nebula Control Center is an Internet portal that allows
you to monitor and manage groups of Zyxel Devices in organizations.
This chapter provides information on configuring the Web Configurator's Initial Setup Wizard. See the
feature-specific chapters in this User’s Guide for background information.
You will be logged out of the Zyxel Device initial setup wizard after 1440 minutes. The settings you
configured will be saved. Log into the Zyxel Device again if you have not finished configuring the initial
setup wizard settings.
Click Next to continue the wizard. Click Finish at the end of the wizard to complete the wizard.
2.2 Terms of Use/Privacy Policy/Firmware Upgrade
Notification
Click the links to see:
• What data Zyxel collects from you and how it is used
• Zyxel privacy policy.
Please also read the firmware upgrade notification carefully.
To use SecuReporter and sandbox, you need to allow Zyxel to collect data from you.
Select I have read and agree with the items above. SecuReporter and sandbox will be enabled
automatically when you select the check box.
Click Next to configure the Zyxel Device settings with the initial setup wizard.
Note: You cannot proceed with the initial setup wizard if you do not select the check box.
To Next Page
Loading...
