Chapter 1 Introduction
USG FLEX H Series User’s Guide
32
The tables have icons for working with table entries.
Figure 16 Common Table Icons
Here are descriptions for the most common table icons.
Working with Lists
When a list of available entries displays next to a list of selected entries, you can often just double-click
an entry to move it from one list to the other.
Figure 17 Working with List
Table 11 Common Table Icons
LABEL DESCRIPTION
Add Click this to create a new entry. For features where the entry’s position in the numbered list is
important (features where the Zyxel Device applies the table’s entries in order like the security policy
for example), you can select an entry and click Add to create a new entry after the selected entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the entry’s
settings. In some tables you can just click a table entry and edit it directly in the table. For those types
of tables small red triangles display for table entries with changes that you have not yet applied.
Remove To remove an entry, select it and click Remove. The Zyxel Device confirms you want to remove it
before doing so.
Active To turn on an entry, select it and click Activate.
Inactive To turn off an entry, select it and click Inactivate.
Move To change an entry’s position in a numbered list, select it and click Move to display a field to type a
number for where you want to put that entry and press [ENTER] to move the entry to the number that
you typed. For example, if you type 6, the entry you are moving becomes number 6 and the previous
entry 6 (if there is one) gets pushed up (or down) one.
To Next Page
Loading...
