Chapter 5 Monitor
USG FLEX H Series User’s Guide
87
The following table describes the labels in this screen.
5.16 The DHCP Table Screen
Use this screen to look at a list of interfaces and their DHCP-assigned IP addresses. To access this screen,
click Network Status >
DHCP Table.
Figure 73 Network Status > DHCP Table
The following table describes the labels in this screen.
Table 46 Network Status > Login Users
LABEL DESCRIPTION
Force Logout Select a user row and click this icon to end a user’s session.
# This field is a sequential value and is not associated with any entry.
User ID This field displays the user name of each user who is currently logged in to the Zyxel
Device.
Role This field displays the types of user accounts the Zyxel Device uses. If the user type is ext-
user (external user), this field will show its external-group information when you move your
mouse over it.
If the external user matches two external-group objects, both external-group object
names will be shown.
See Section 23.1.2 on page 332 for more information on the user accounts.
From This field displays the IP address of the computer used to log in to the Zyxel Device.
Login Time This field displays how long a user account has logged into the Zyxel Device.
Type This field displays the way the user logged into the Zyxel Device. The user can log into the
Zyxel Device using HTTP, HTTPS, SSH, FTP and console.
Tunnel IP This field displays the IP address of the VPN tunnel a user account is using to access the
Zyxel Device.
This field displays 0.0.0.0 if a user account is not accessing the Zyxel Device through a VPN
tunnel.
Reauth/Lease Time This field displays the amount of reauthentication time remaining and the amount of
lease time remaining for each user. See
Section 14.1 on page 208 for more information on
the reauthentication time and lease time.
Table 47 Network Status > DHCP Table
LABEL DESCRIPTION
Current DHCP List
Interface Select a Zyxel Device interface that has DHCP enabled to show to which devices it has
assigned DHCP IP addresses.
Add Click this to add an entry that maps a static IP to a MAC address.
To Next Page
Loading...
