USG FLEX H Series User’s Guide
392
CHAPTER 25
Log and Report
25.1 Overview
Use these screens to configure daily reporting and log settings.
25.1.1 What You Can Do In this Chapter
• Use the Log/Events screen (Section 25.2 on page 392) to view the Zyxel Device log messages.
• Use the Log Settings screen (Section 25.3 on page 394) to specify settings for recording log messages
and alerts and storing them on a connected USB storage device.
• Use the SecuReporter screen (Section 25.4 on page 396) to enable SecuReporter logging on your
Zyxel Device, see license status, type, expiration date and access a link to the SecuReporter web
portal. The SecuReporter web portal collects and analyzes logs from your Zyxel Device in order to
identify anomalies, alert on potential internal/ external threats, and report on network usage.
• Use the Email Daily Report screen (Section 25.5 on page 399) to start or stop traffic collection and
view reports on traffic passing through the Zyxel Device.
25.2 Log/Events Screen
To access this screen, click Log & Report > Log/Events. The log is displayed on the following screen.
Note: When a log reaches the maximum number of log messages, new log messages
automatically overwrite existing log messages, starting with the oldest existing log
message first.
• The maximum possible number of log messages in the Zyxel Device varies by model.
Events that generate an alert (as well as a log message) display in red. Regular logs display in black.
Click a column’s heading cell to sort the table entries by that column’s criteria. Click the heading cell
again to reverse the sort order. The Web Configurator saves the filter settings if you leave the Log/Events
screen and return to it later.
To Next Page
Loading...
