Chapter 1 Introduction
USG FLEX H Series User’s Guide
25
This table describes the fields in this screen.
1.4.4 Navigation Panel
Use the navigation panel menu items to open status and configuration screens. Click the arrow of the
navigation panel to hide the panel. The following sections introduce the Zyxel Device’s navigation
panel menus and their screens.
Table 6 References
LABEL DESCRIPTION
Name This identifies the object for which the configuration settings that use it are displayed. Click the
object’s name to display the object’s configuration screen in the main window.
# This field is a sequential value, and it is not associated with any entry.
Service This is the type of setting that references the selected object. Click a service’s name to display
the service’s configuration screen in the main window.
Priority If it is applicable, this field displays the referencing configuration item’s position in its list (for
example, WAN_to_Device is the sixth rule in Policy Control), otherwise - displays.
Name This field identifies the configuration item that references the object.
Description If the referencing configuration has a description configured, it displays here.
Refresh Click this to update the information in this screen.
Cancel Click this to close the screen.
To Next Page
Loading...
