ZyXEL Communications USG FLEX H Series - Auto Update; Signature Update

Chapter 6 Licensing
USG FLEX H Series User’s Guide
96
6.1.4 Signature Update
Click the Update icon ( ) of a service to display the following screen. Use this screen to view the service
update status.
Figure 80 Licensing > Signature Update > Update > Update
6.1.5 Auto Update
Click the Schedule icon ( ) of a service to display the following screen.
Release Date This field displays the date and time the set was released.
Last Sync This field displays the date and time the Zyxel Device last checked for new signatures at
myZyxel.
Action Click the Update icon ( )to have the Zyxel Device immediately check for new
signatures at myZyxel. If new signatures are found, they are then downloaded to the
Zyxel Device.
Click the Schedule icon ( ) to have the Zyxel Device automatically check for new
signatures regularly at the time and day specified. You should select a time when your
network is not busy for minimal interruption.
Table 53 Licensing > Signature Update (continued)
LABEL DESCRIPTION