ZyXEL Communications USG FLEX H Series - URL Threat Filter Block List Screen

Chapter 17 Reputation Filter
USG FLEX H Series User’s Guide
286
Figure 179 Security Service > Reputation Filter > URL Threat Filter > Allow List
The following table describes the labels in this screen.
17.4.2 URL Threat Filter Block List Screen
Use this screen to create block list entries. The Zyxel Device will block incoming packets from the listed
IPv4 addresses and URLs.
Click Security Service > Reputation Filter > URL Threat Filter > Block List to display the configuration screen
as shown next.
Table 144 Security Service > Reputation Filter > URL Threat Filter > Allow List
LABEL DESCRIPTION
Enable Select this to bypass checking by this feature (if enabled) and automatically allow
packets from the listed IPv4 addresses and URLs.
Log These are the log options:
• no: Do not create a log when the Zyxel Device detects a connection attempt to or
from the web pages of the specified categories listed in the allow list.
• log: Create a log on the Zyxel Device when it detects a connection attempt to or
from the web pages of the specified categories listed in the allow list.
Add Click this to create a new entry.
Edit Select an entry and click this to be able to modify it.
Remove Select an entry and click this to delete it.
Allow List This field displays the URL of this entry.
Apply Click Apply to save your changes back to the Zyxel Device.
Reset Click Reset to return the screen to its last-saved settings.