Chapter 13 Security Policy
USG FLEX H Series User’s Guide
200
13.4.1 The DoS Prevention Policy Screen
Click Security Policy > DoS Prevention > DoS Prevention Policy to display the next screen.
Figure 137 Security Policy > DoS Prevention > DoS Prevention Policy
The following table describes the labels in this screen.
Table 99 Security Policy > DoS Prevention > DoS Prevention Policy
LABEL DESCRIPTION
General Settings
Enable Anomaly Detection
and Prevention
Select this to enable traffic anomaly and protocol anomaly detection and
prevention.
Add Select an entry and click Add to append a new row beneath the one selected. ADP
policies are applied in order (Priority) shown in this screen
Edit Select an entry and click this to be able to modify it.
Remove Select an entry and click this to delete it.
Active To turn on an entry, select it and click Activate.
Inactive To turn off an entry, select it and click Inactivate.
Move To change an entry’s position in the numbered list, select it and click Move to display
a field to type a number for where you want to put that entry and press [ENTER] to
move the entry to the number that you typed.
Status The activate (light bulb) icon is lit when the entry is active and dimmed when the
entry is inactive.
Priority This is the rank in the list of anomaly profile policies. The list is applied in order of
priority.
Name This is the name of the anomaly profile policy.
To Next Page
Loading...
