EasyManua.ls Logo

ZyXEL Communications USG FLEX H Series - 1.2 Registration at Nebula Control Center (NCC)

ZyXEL Communications USG FLEX H Series
462 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 1 Introduction
USG FLEX H Series User’s Guide
17
Not all models support all features. See Table 1 on page 16 for the specific features that your model
supports.
For information on interface names by model, default port or interface name mapping, and default
interface or zone mapping please see
Section 3.4 on page 56.
See the product’s datasheet for detailed information on a specific model.
1.2 Registration at Nebula Control Center (NCC)
Nebula Control Center (NCC) is an Internet portal that allows you to configure and monitor groups of
Zyxel Devices in organizations. You must register your Zyxel Device at NCC to use security services and
upgrade firmware. See Licensing > Licenses for security services available for your Zyxel Device.
Use NCC to monitor and manage your Zyxel Device. Use the web configurator to configure the Zyxel
Device settings.
Run the initial setup wizard to register your Zyxel Device at NCC. Or you can follow the steps below to
register your Zyxel Device at NCC.
1 Log into NCC (https://nebula.zyxel.com) with your Zyxel account. If you do not have a Zyxel account,
you will be redirected to another screen to create one.
2 After you log in, Click Go under NCC and then Let’s Start to run the NCC setup wizard. Create an
organization and a site or select an existing site.
3 Add the Zyxel Device to this site by entering its MAC address and serial number. You’ll find the Zyxel
Device MAC address and serial number on its label or scan the QR code using the Nebula app.
4 Configure the WAN interface that the Zyxel Device will use to connect to Nebula through the Internet.
If you did not register your Zyxel Device at NCC, you will see a warning message every time you log into
the Zyxel Device web configurator using an admin account.
1.2.1 Grace Period
SecuReporter and service licenses have a 15-day grace period after a license expires. Services will
continue to work in this period during which you will receive notifications to renew your licenses. New
licenses are valid for 1 year from the date of purchase.
Please note that a trial license does not have a grace period.
Table 2 Security Feature List
Application Patrol Intrusion Prevention System (IPS)
DoS Prevention Content Filtering
•Anti-Malware Secure Socket Layer (SSL) encrypted
traffic Inspection

Table of Contents

Related product manuals