Chapter 5 Monitor
USG FLEX H Series User’s Guide
86
5.15 The Login Users Screen
Use this screen to see a list of users currently logged into the Zyxel Device. To access this screen, click
Network Status >
Login Users.
Figure 72 Network Status > Login Users
Add to block list Select an entry and click Add to block list to stop the selected client from
connecting to the Zyxel Device.
Remove from block list Select an entry and click Remove from block list to allow the selected client to
connect to the Zyxel Device.
Feedback Select an entry and click Feedback to report on a client that is wrongly identified
regarding its Category, Operating System or Type.
Status This field displays the status of the clients.
Online ( )- The connection between the client and the Zyxel Device is up.
Offline ( )- The connection between the client and the Zyxel Device is down.
Block ( )- The client is blocked from the connection to the Zyxel Device.
MAC Address This field displays the MAC address of the client.
MAC Vendor This displays the MAC address Organizationally Unique Identifier (OUI). The OUI is the
first three octets in a MAC address and uniquely identifies the manufacturer of a
network device.
IP Address This field displays the IP address of the client.
Hostname This field displays the name used to identify this device on the network.
Description This field displays the descriptive name of the client.
Category This field displays the type of the device of the client, such as printer or smart TV.
Operating System This field displays the operating system of the client.
OS Version This field displays the version of the operating system of the client.
Type This field displays the model names of the client.
First-seen This field displays the time when the client first sends traffic to the Zyxel Device since
the Zyxel Device last reboot.
Last-seen This field displays the time when the client last sends traffic to the Zyxel Device.
User This field displays the type of user account the client uses. See Section 23.1.1 on
page 331 for more information the user account types.
Auth method This field displays the authentication method that is used to authenticate the client.
Connected to This field displays the interface to which a client is connected directly to on the Zyxel
Device.
Table 45 Network Status > Device Insight (continued)
LABEL DESCRIPTION
To Next Page
Loading...
