ZyXEL Communications USG FLEX H Series - Address Group Summary Screen

Chapter 14 Object
USG FLEX H Series User’s Guide
211
14.1.3 Address Group Summary Screen
The Address Group screen provides a summary of all address groups. To access this screen, click Object
> Address > Address Group. Click a column’s heading cell to sort the table entries by that column’s
criteria. Click the heading cell again to reverse the sort order.
Figure 144 Object > Address > Address Group
The following table describes the labels in this screen. See Section 14.1.3.1 on page 211 for more
information as well.
14.1.3.1 Address Group Add/Edit Screen
The Address Group Add/Edit screen allows you to create a new address group or edit an existing one. To
access this screen, go to the Address Group screen (see
Section 14.1.3 on page 211), and click either
the Add icon or an Edit icon in the IPv4 Address Group Configuration section.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to return the screen to its last-saved settings.
Table 106 Object > Address > Address > Add/Edit
LABEL DESCRIPTION
Table 107 Configuration > Object > Address/Geo IP > Address Group
LABEL DESCRIPTION
IPv4 Address Group Configuration
Add Click this to create a new entry.
Edit Select an entry and click Edit to be able to modify the entry’s settings.
Remove To remove an entry, select it and click Remove. The Zyxel Device confirms you want to remove
it before doing so.
Reference Select an entry and click Reference to check which settings use the entry.
Name This field displays the name of each address group.
Description This field displays the description of each address group, if any.
Reference This displays the number of times an object reference is used in a profile.