Chapter 4 Dashboard
USG FLEX H Series User’s Guide
60
4.2.3 Resource Usage Screen
Click the bar to see a graphic on that resource.
Figure 50 Dashboard > System > Resources Usage
The table describes the fields in the screen.
4.2.4 Bandwidth
This screen displays a line graph of packet statistics for each interface.
Zone This field displays the zone to which the interface is currently assigned.
IP Address/
Mask
This field displays the current IP address and subnet mask assigned to the interface. If the
interface is a member of an active virtual router, this field displays the IP address it is currently
using. This is either the static IP address of the interface (if it is the master) or the management
IP address (if it is a backup).
Table 25 Dashboard > System (continued)> Virtual Device
LABEL DESCRIPTION
Table 26 Dashboard > System > Resource Usage
LABEL DESCRIPTION
CPU This field displays what percentage of the Zyxel Device’s processing capability is
currently being used. Click this field to display a chart of the Zyxel Device’s recent
CPU usage.
Flash This field displays what percentage of the Zyxel Device’s onboard flash memory is
currently being used.
Memory This field displays what percentage of the Zyxel Device’s RAM is currently being used.
Click this field to display a chart of the Zyxel Device’s recent memory usage.
Sessions This field shows how many sessions, established and non-established, that pass
through/from/to/within the Zyxel Device. Click this field to display a chart of Zyxel
Device’s recent session usage.
To Next Page
Loading...
