ZyXEL Communications USG FLEX H Series - Adding a RADIUS Server

Chapter 23 User & Authentication
USG FLEX H Series User’s Guide
345
23.3.3 Adding a RADIUS Server
Click User & Authentication > AAA Server > RADIUS Server Summary > Add to display the following
screen. Use this screen to create a new RADIUS server entry or edit an existing one.
Figure 213 User & Authentication > AAA Server > RADIUS Server Summary > Add
Name This is the name of the RADIUS server entry.
Server Address This is the address of the RADIUS server.
Reference This is the number of times the entry is used in other settings.
Table 171 User & Authentication > AAA Server > RADIUS (continued)Server Summary
LABEL DESCRIPTION