Chapter 14 Object
USG FLEX H Series User’s Guide
225
Figure 155 Object > Zone > Add
The following table describes the labels in this screen.
14.4 Schedule Overview
Use schedules to set up one-time and recurring schedules for policy routes, security policies, application
patrol, and content filtering. The Zyxel Device supports one-time and recurring schedules. One-time
Table 116 Object > Zone > Add/Edit
LABEL DESCRIPTION
Name For a system default zone, the name is read only.
For a user-configured zone, type the name used to refer to the zone. You may use 2-30
single-byte characters, including 0-9a-zA-Z_.-, but the first character cannot be a number.
This value is case-sensitive.
Description Enter the description associated with the zone, if any. You can use 1 to 30 single-byte
characters, including 0-9a-zA-Z!”#$%’()*+,-/:;=?@_
&.<>[\]{|}^‘are not allowed.
Member List The list on the left displays the interfaces and VPN tunnels that do not belong to any zone.
Select the interfaces and VPN tunnels that you want to add to the zone you are editing,
and click the right arrow button to add them.
The list on the right displays the interfaces and VPN tunnels that belong to the zone. Select
any interfaces that you want to remove from the zone, and click the left arrow button to
remove them.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to return the screen to its last-saved settings.
To Next Page
Loading...
