Chapter 27 Diagnostics
USG FLEX H Series User’s Guide
417
27.4 The CPU / Memory Status Screen
Click Maintenance > Diagnostics > CPU / Memory Status to open the CPU/Memory Status screen. Use
this screen to view the CPU and memory performance of various applications on the Zyxel Device.
Save data to USB
storage
Select this to have the Zyxel Device store packet capture entries only on a USB storage
device connected to the Zyxel Device if the Zyxel Device allows this.
Status:
Unused - the connected USB storage device was manually unmounted by using the
Remove Now button or for some reason the Zyxel Device cannot mount it.
none - no USB storage device is connected.
service deactivated - USB storage feature is disabled (in Configuration > System > USB
Storage), so the Zyxel Device cannot use a connected USB device to store system logs
and other diagnostic information.
available - you can have the Zyxel Device use the USB storage device. The available
storage capacity also displays.
Note: The Zyxel Device reserves some USB storage space as a buffer.
Save data to ftp server Select this to have the Zyxel Device store packet capture entries on the defined FTP site.
The available storage size is displayed as well.
Server Address Type the IP address of the FTP server.
Server Port Type the port this server uses for FTP traffic. The default FTP port is 21.
Name Type the login username to access the FTP server.
Password Type the associated login password to access the FTP server.
Table 205 Maintenance > Diagnostics > Packet Capture > Edit (continued)
LABEL DESCRIPTION
To Next Page
Loading...
