ZyXEL Communications USG FLEX H Series - 7.2 Interface Screen

Chapter 7 Interfaces
USG FLEX H Series User’s Guide
103
7.2 Interface Screen
Use this screen to view your Zyxel Device interface settings. To access this screen, click Network >
Interface > Interface.
Figure 83 Network > Interface > Interface
Each field is described in the following table.
Table 60 Network > Interface > Interface
LABEL DESCRIPTION
External
Add Click this to add a new entry.
Edit Select an entry and click Edit to open a screen where you can modify the entry’s settings.
Remove To remove a virtual interface, select it and click Remove. The Zyxel Device confirms you
want to remove it before doing so.
Connect To dial-up to a PPPoE interface, select it and click Connect.
Disconnect To disconnect from a PPPoE interface, select it and click Disconnect.