Chapter 22 SSL Inspection
USG FLEX H Series User’s Guide
323
22.2.1 Add / Edit SSL Inspection Profiles
Click Security Service > SSL Inspection > Profile > Add to create a new profile or select an existing profile
and click Edit to change its settings.
Figure 200 Security Service > SSL Inspection > Profile > Add / Edit
Edit Select an entry and click this to be able to modify it.
Remove Select an entry and click this to delete it.
References Select an entry and click References to open a screen that shows which settings use the
entry.
Action Click this icon to apply the entry to a policy control rule.
Go to the Security Policy > Policy Control screen to check the result.
# This is the entry’s index number in the list.
Name This displays the name of the profile.
Description This displays the description of the profile.
CA Certificate This displays the CA certificate being used in this profile.
Reference This displays the number of times an object reference is used in a profile.
Table 161 Security Service > SSL Inspection > Profile (continued)
LABEL DESCRIPTION
To Next Page
Loading...
