Chapter 2 Initial Setup Wizard
USG FLEX H Series User’s Guide
41
Figure 26 Register Warning Message
2.6 License Activations
After you register your Zyxel Device, security services supported by your model will be activated
automatically.
Go to Licensing > Licenses after you log into the web configurator if you want to check the Zyxel Device
services status.
Figure 27 Service Activation
Click Refresh and wait a few moments for the registration information to update in this screen. If the
page does not refresh, make sure the Internet connection is working and click Refresh again. To check
your Internet connection, try to access the Internet from a computer connected to a LAN port on the
Zyxel Device. If you cannot, then check your Internet access settings on the Zyxel Device.
To Next Page
Loading...
