ZyXEL Communications USG FLEX H Series - Page 40

Chapter 2 Initial Setup Wizard
USG FLEX H Series User’s Guide
40
Figure 24 Exit Wizard
Make sure to go to Licensing > Licenses and follow the instructions to register your Zyxel Device once
your Zyxel Device is connected to the Internet. Please note that you will only see the following screen if
you log in using an admin account.
Figure 25 Licensing > Licenses
You will also see a warning message to remind you to register your Zyxel Device every time you log into
the web configurator. Please note that you will only see the warning message if you log in using an
admin account.