Chapter 5 Monitor
USG FLEX H Series User’s Guide
85
In the graphic below, A is a client connected to the Zyxel Device using a wired connection. B is a client
connected to the Zyxel Device through an AP using a wired connection. C is a client connected to the
Zyxel Device through an AP using a WiFi connection. D is a client connected to the Zyxel Device through
an IPSec VPN tunnel using SecuExtender.
Figure 70 Clients’ Device Insight Example
Click Network Status > Device Insight to show the following screen.
Figure 71 Network Status > Device Insight
The following table describes the labels in this screen.
Table 45 Network Status > Device Insight
LABEL DESCRIPTION
Edit Double-click an entry or select it and click Edit to modify the entry’s settings in the
Description field.
Remove Select an entry and click Remove to remove a client from the table that’s no longer
connected to your network.
For example, guest A visited your company over a month ago. Guest A used his
cellphone to connect to your Zyxel Device networks. His cellphone was identified
and shown in the Device Insight table. Guest A has left for over a month and you’re
sure he will not return in the near future. You can use the Remove button to remove
his device from this table. Guest A’s device will be identified and shown in the table
again if he connects to your Zyxel Device networks in the future.
Please note that clients that are blocked cannot be removed. Make sure to unblock
clients before you remove them.
To Next Page
Loading...
