Chapter 7 Interfaces
USG FLEX H Series User’s Guide
124
Figure 92 Network > Interface > Interface > Bridge > Add / Edit
Each field is described in the table below.
Table 67 Network > Interface > Interface > Bridge > Add / Edit
LABEL DESCRIPTION
General Settings
Enable Interface Select this to enable this interface. Clear this to disable this interface.
Interface Properties
Name This field is read-only if you are editing the interface. Enter the name of the bridge interface.
The format is brx, where x is 0 - 11. For example, br0, br3, and so on.
To Next Page
Loading...
