Chapter 7 Interfaces
USG FLEX H Series User’s Guide
132
Figure 96 Network > Interface > Trunk
The following table describes the items in this screen.
Table 69 Network > Interface > Trunk
LABEL DESCRIPTION
Trunk Selection Select whether the Zyxel Device is to use the default system WAN trunk or one of the user
configured WAN trunks as the default trunk for routing traffic from internal interfaces to
external interfaces.
Add Click this to create a new user-configured trunk.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify
the entry’s settings.
Remove To remove a user-configured trunk, select it and click Remove. The Zyxel Device confirms
you want to remove it before doing so.
Name This field displays the label that you specified to identify the trunk.
Algorithm This field displays the load balancing method the trunk is set to use.
Members This field displays the interfaces that belong to the trunk.
Apply Click this button to save your changes to the Zyxel Device.
Reset Click this button to return the screen to its last-saved settings.
To Next Page
Loading...
