EasyManua.ls Logo

ZyXEL Communications USG FLEX H Series - Page 140

ZyXEL Communications USG FLEX H Series
462 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 8 Routing
USG FLEX H Series User’s Guide
140
Figure 101 Network > Routing > Policy Route
The following table describes the labels in this screen.
Table 74 Network > Routing > Policy Route
LABEL DESCRIPTION
Use IPv4 Policy Route
to Override Direct
Route
Select this to have the Zyxel Device forward packets that match a policy route according
to the policy route instead of sending the packets directly to a connected network.
Add Click this to create a new entry. Select an entry and click Add to create a new entry after
the selected entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify
the entry’s settings.
Remove To remove an entry, select it and click Remove. The Zyxel Device confirms you want to
remove it before doing so.
Status This icon is lit when the entry is active, red when the next hop’s connection is down, and
dimmed when the entry is inactive.
User This is the name of the user (group) object from which the packets are sent. any means all
users.
Schedule This is the name of the schedule object. any means the route is active at all times if
enabled.
Incoming This is the interface on which the packets are received.
Source This is the name of the source IP address (group) object, including geographic address
and FQDN (group) objects. any means all IP addresses.
Destination This is the name of the destination IP address (group) object, including geographic and
FQDN (group) address objects. any means all IP addresses.
DSCP Code This is the DSCP value of incoming packets to which this policy route applies.
any means all DSCP values or no DSCP marker.
default means traffic with a DSCP value of 0. This is usually best effort traffic
The “af” entries stand for Assured Forwarding. The number following the “af” identifies one
of four classes and one of three drop preferences. See
Assured Forwarding (AF) PHB for
DiffServ for more details.
Service This is the name of the service object. any means all services.
Next-Hop This is the next hop to which packets are directed. It helps forward packets to their
destinations and can be an IP address of a router or a VTI interface.

Table of Contents

Related product manuals