Chapter 8 Routing
USG FLEX H Series User’s Guide
142
Figure 102 Network > Routing > Policy Route > Add/Edit
The following table describes the labels in this screen.
Table 75 Network > Routing > Policy Route > Add/Edit
LABEL DESCRIPTION
Enable Select this to activate the rule.
Name Enter a name to identify this rule.
Description Enter a descriptive name consists of 1 to 60 single-byte characters, including a-zA-Z0-9.
Special characters and spaces are allowed.
Criteria
User Select a user name or user group from which the packets are sent.
Incoming Select where the packets are coming from; any, an interface, a tunnel, an SSL VPN, or the
Zyxel Device itself. For an interface, a tunnel, or an SSL VPN, you also need to select the
individual interface, VPN tunnel, or SSL VPN connection.
Source Address Select a source IP address object, including geographic address and FQDN (group)
objects, from which the packets are sent.
To Next Page
Loading...
