Chapter 14 Object
USG FLEX H Series User’s Guide
231
Figure 160 Schedule > Schedule Group > Add
The following table describes the fields in the above screen.
Table 121 Configuration > Object > Schedule > Schedule Group > Add
LABEL DESCRIPTION
Group Members
Name Type the name used to refer to the recurring schedule. You may use 2-30 single-byte
characters, including 0-9a-zA-Z, underscores(
_), or dashes (-), but the first character cannot be
a number. This value is case-sensitive.
Description Enter a description of the service group, if any. You can use 1 to 30 single-byte characters,
special characters and spaces are allowed.
Member List This list displays the names of the service and service group objects that have been added to
the service group. The order of members is not important.
Select items from the list on the left that you want to be members and move them to the list on
the right. Move any members you do not want included to the list on the left.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to return the screen to its last-saved settings.
To Next Page
Loading...
