Chapter 15 Application Patrol
USG FLEX H Series User’s Guide
236
The following table describes the labels in this screen.
Table 123 Security Service > App Patrol > Add/Edit > Application Management
LABEL DESCRIPTION
General Settings
Name Type the name of the profile. You may use 1-31 alphanumeric characters, underscores(_),
or dashes (-), but the first character cannot be a number. This value is case-sensitive. These
are valid, unique profile names:
•MyProfile
•mYProfile
•Mymy12_3-4
These are invalid profile names:
• 1mYProfile
• My Profile
• MyProfile?
• Whatalongprofilename123456789012
Description Type a description for the profile rule to help identify the purpose of rule. You may use 1-31
alphanumeric characters, underscores (
_), or dashes (-), but the first character cannot be
a number. This value is case-sensitive. This field is optional.
Add Click Add to create a new profile.
Edit Select an entry and click this to modify it.
Remove Select an entry and click Remove to delete the selected entry.
Log Select whether to have the Zyxel Device generate a log (log), log and alert (log alert) or
neither (no) by default when traffic matches a signature in this category.
Action Select the default action for all signatures in this category.
forward - the Zyxel Device routes packets that matches these signatures.
drop - the Zyxel Device silently drops packets that matches these signatures without
sending a TCP RST or ICMP host unreachable message to both the sender and receiver.
reject - the Zyxel Device drops packets that matches these signatures and sends a TCP RST
or ICMP host unreachable message to both the sender and receiver.
Priority This field is a sequential value showing the number of the profile. The ordering of your
profiles is important as profiles are applied in sequence.
Category This field displays the category type of the application.
Application This field displays the application name or numbers of applications included in the policy.
Log Select whether to have the Zyxel Device generate a log (log), log and alert (log alert) or
neither (no) by default when traffic matches a signature in this category.
Action Select the default action for all signatures in this category.
forward - the Zyxel Device routes packets that matches these signatures.
drop - the Zyxel Device silently drops packets that matches these signatures without
notification.
reject - the Zyxel Device drops packets that matches these signatures and sends
notification.
Apply Click Apply to save your settings to the Zyxel Device.
Reset Click Reset to return to the profile summary page without saving any changes.
To Next Page
Loading...
