Chapter 26 File Manager
USG FLEX H Series User’s Guide
410
Auto Update Slide the switch to the right to have the Zyxel Device automatically check for and download
new firmware to the standby partition at the time and day specified.
You should select a time when your network is not busy for minimal interruption.
Daily Select this option to have the Zyxel Device check for new firmware every day at the specified
time. The time format is the 24 hour clock, so ‘0’ means midnight for example.
Weekly Select this option to have the Zyxel Device check for new firmware once a week on the day
and at the time specified.
Auto Reboot Slide the switch to the newly downloaded firmware become the running firmware after the
Zyxel Device automatically restarts.
Apply Click Apply to save your changes back to the Zyxel Device.
Reset Click Reset to return the screen to its last-saved settings.
Table 202 Maintenance > File Manager > Firmware Management (continued)
LABEL DESCRIPTION
To Next Page
Loading...
