Appendix C Legal Information
USG FLEX H Series User’s Guide
444
EUROPEAN UNION and UNITED KINGDOM
The following information applies if you use the product within the European Union or United Kingdom.
List of National Codes
Safety Warnings
• Do not put the device in a place that is humid, dusty, has extreme temperatures, or that blocks the device ventilation slots. These conditions
may harm your device.
• Please refer to the device back label, datasheet, box specifications or catalog information for power rating of the device and operating
temperature.
• There is a remote risk of electric shock from lightning: (1) Do not use the device outside, and make sure all the connections are indoors. (2) Do
not install or service this device during a thunderstorm.
• Do not expose your device to dampness, dust or corrosive liquids.
• Do not store things on the device.
• Do not obstruct the device ventilation slots as insufficient airflow may harm your device. For example, do not place the device in an
enclosed space such as a box or on a very soft surface such as a bed or sofa.
• Do not install or service this device during a thunderstorm. There is a remote risk of electric shock from lightning.
• Connect ONLY suitable accessories to the device.
• Do not open the device. Opening or removing the device covers can expose you to dangerous high voltage points or other risks.
• Only qualified service personnel should service or disassemble this device. Please contact your vendor for further information.
• Make sure to connect the cables to the correct ports.
• Place connected cables carefully so that no one will step on them or stumble over them.
• Disconnect all cables from this device before servicing or disassembling.
• Do not remove the plug and connect it to a power outlet by itself; always attach the plug to the power adaptor first before connecting it to
a power outlet.
• Do not allow anything to rest on the power adaptor or cord and do NOT place the product where anyone can walk on the power adaptor
or cord.
• Please use the provided or designated connection cables/power cables/ adaptors. Connect the power adaptor or cord to the right supply
voltage (for example, 120V AC in North America or 230V AC in Europe). If the power adaptor or cord is damaged, it might cause
electrocution. Remove the damaged power adaptor or cord from the device and the power source. Do not try to repair the power adaptor
or cord by yourself. Contact your local vendor to order a new one.
• CAUTION: There is a risk of explosion if you replace the device battery with an incorrect one. Dispose of used batteries according to the
instructions. Dispose them at the applicable collection point for the recycling of electrical and electronic devices. For detailed information
about recycling of this product, please contact your local city office, your household waste disposal service or the store where you
purchased the product.
• Do not leave a battery in an extremely high temperature environment or surroundings since it can result in an explosion or the leakage of
flammable liquid or gas.
• Do not subject a battery to extremely low air pressure since it may result in an explosion or the leakage of flammable liquid or gas.
COUNTRY ISO 3166 2 LETTER CODE COUNTRY ISO 3166 2 LETTER CODE
Austria AT Liechtenstein LI
Belgium BE Lithuania LT
Bulgaria BG Luxembourg LU
Croatia HR Malta MT
Cyprus CY Netherlands NL
Czech Republic CR Norway NO
Denmark DK Poland PL
Estonia EE Portugal PT
Finland FI Romania RO
France FR Serbia RS
Germany DE Slovakia SK
Greece GR Slovenia SI
Hungary HU Spain ES
Iceland IS Sweden SE
Ireland IE Switzerland CH
Italy IT Turkey TR
Latvia LV United Kingdom GB
To Next Page
Loading...
