Chapter 7 Monitor
ZyWALL/USG Series User’s Guide
182
•Use the Wireless > Station Info screen (Section 7.15.6 on page 210) to view information on
connected wireless stations.
•Use the Wireless > Detected Device screen (Section 7.15.6 on page 210) to view information
about suspected rogue APs.
•Use the Printer Status screen (see Section 7.16 on page 212) to view information about the
connected statement printers.
•Use the VPN Monitor > IPSec screen (Section 7.17 on page 213) to display and manage active
IPSec SAs.
•Use the VPN Monitor > SSL screen (see Section 7.18 on page 214) to list the users currently
logged into the VPN SSL client portal. You can also log out individual users and delete related
session information.
•Use the VPN Monitor > L2TP over IPSec screen (see Section 7.19 on page 215) to display and
manage the ZyWALL/USG’s connected L2TP VPN sessions.
•Use the UTM Statistics > App Patrol screen (see Section 7.20 on page 215) to start or stop
data collection and view virus statistics
•Use the UTM Statistics > Content Filter screen (Section 7.21 on page 217) to start or stop
data collection and view content filter statistics.
•Use the UTM Statistics > IDP screen (Section 7.22 on page 218) to start or stop data collection
and view IDP statistics.
•Use the UTM Statistics > Anti-Virus screen (see Section 7.23 on page 220) to start or stop
data collection and view virus statistics.
•Use the UTM Statistics > Anti-Spam screen (Section 7.24 on page 222) to start or stop data
collection and view spam statistics.
•Use the UTM Statistics > Anti-Spam > Status screen (Section 7.24.2 on page 225) to see
how many mail sessions the ZyWALL/USG is currently checking and DNSBL statistics.
•Use the UTM Statistics > SSL Inspection screen (Section 7.25 on page 226) to see a report on
SSL Inspection and a certificate cache list.
•Use the Log > View Log screen (see Section 7.26.1 on page 228) to view the ZyWALL/USG’s
current log messages. You can change the way the log is displayed, you can e-mail the log, and
you can also clear the log in this screen.
•Use the Log > View AP Log screen (see Section 7.26.2 on page 230) to view the ZyWALL/USG’s
current wireless AP log messages.
•Use the Log > Dynamic Users Log screen (see
Section 7.26.3 on page 233) to view the
ZyWALL/USG’s dynamic guest account log messages.
7.2 The Port Statistics Screen
Use this screen to look at packet statistics for each Gigabit Ethernet port. To access this screen,
click Monitor > System Status > Port Statistics.
To Next Page
Loading...
