ZyXEL Communications VPN Series - The Dhcpv6 Request Screen

Chapter 42 Object
ZyWALL/USG Series User’s Guide
819
42.14.1 The DHCPv6 Request Screen
The Request screen allows you to add, edit, and remove DHCPv6 request type objects. To access
this screen, login to the Web Configurator, and click Configuration > Object > DHCPv6 >
Request.
Figure 566 Configuration > Object > DHCPv6 > Request
The following table describes the labels in this screen.
42.14.1.1 DHCPv6 Request Add/Edit Screen
The Request Add/Edit screen allows you to create a new request object or edit an existing one.
To access this screen, go to the Request screen (see Section 42.14.1 on page 819), and click
either the Add icon or an Edit icon.
Figure 567 Configuration > DHCPv6 > Request > Add
Table 340 Configuration > Object > DHCPv6 > Request
LABEL DESCRIPTION
Configuration
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry’s settings.
Remove To remove an entry, select it and click Remove. The ZyWALL/USG confirms you want to
remove it before doing so.
Object
References
Select an entry and click Object References to open a screen that shows which settings
use the entry.
# This field is a sequential value, and it is not associated with a specific object.
Name This field displays the name of each request object.
Type This field displays the request type of each request object.
Interface This field displays the interface used for each request object.
Value This field displays the value for each request object.