ZyXEL Communications VPN Series - Profile > Group View Screen

Chapter 37 IDP
ZyWALL/USG Series User’s Guide
647
37.2.3 Profile > Group View Screen
Select Configuration > UTM Profile > IDP > Profile and then click Add to create a new profile
or select an existing profile, then click a group in the base profile box (or double-click the existing
profile) to modify it. Group view is displayed first by default.
Figure 450 Configuration > UTM Profile > IDP > Profile > Add > Edit: Group View
The following table describes the fields in this screen.
Table 248 Configuration > UTM Profile> IDP > Profile > Add > Group View
LABEL DESCRIPTION
Name This is the name of the profile. You may use 1-31 alphanumeric characters,
underscores(
_), or dashes (-), but the first character cannot be a number. This value is
case-sensitive. These are valid, unique profile names:
• MyProfile
• mYProfile
• Mymy12_3-4
These are invalid profile names:
• 1mYProfile
• My Profile
• MyProfile?
• Whatalongprofilename123456789012
Description Enter additional information about this IDP rule. You can enter up to 60 characters ("0-9",
"a-z", "A-Z", "-" and "_").