ZyWALL/USG Series User’s Guide
822
CHAPTER 43
System
43.1 Overview
Use the system screens to configure general ZyWALL/USG settings.
43.1.1 What You Can Do in this Chapter
•Use the System > Host Name screen (see Section 43.2 on page 823) to configure a unique
name for the ZyWALL/USG in your network.
•Use the System > USB Storage screen (see Section 43.3 on page 823) to configure the
settings for the connected USB devices.
•Use the System > Date/Time screen (see Section 43.4 on page 824) to configure the date and
time for the ZyWALL/USG.
•Use the System > Console Speed screen (see Section 43.5 on page 828) to configure the
console port speed when you connect to the ZyWALL/USG via the console port using a terminal
emulation program.
•Use the System > DNS screen (see Section 43.6 on page 829) to configure the DNS (Domain
Name System) server used for mapping a domain name to its corresponding IP address and vice
versa.
•Use the System > WWW screens (see Section 43.7 on page 839) to configure settings for HTTP
or HTTPS access to the ZyWALL/USG and how the login and access user screens look.
•Use the System > SSH screen (see Section 43.8 on page 856) to configure SSH (Secure SHell)
used to securely access the ZyWALL/USG’s command line interface. You can specify which zones
allow SSH access and from which IP address the access can come.
•Use the System > TELNET screen (see Section 43.9 on page 860) to configure Telnet to access
the ZyWALL/USG’s command line interface. Specify which zones allow Telnet access and from
which IP address the access can come.
•Use the System > FTP screen (see Section 43.10 on page 862) to specify from which zones FTP
can be used to access the ZyWALL/USG. You can also specify from which IP addresses the access
can come. You can upload and download the ZyWALL/USG’s firmware and configuration files
using FTP. .
• Your ZyWALL/USG can act as an SNMP agent, which allows a manager station to manage and
monitor the ZyWALL/USG through the network. Use the System > SNMP screen (see Section
43.11 on page 863) to configure SNMP settings, including from which zones SNMP can be used to
access the ZyWALL/USG. You can also specify from which IP addresses the access can come.
•Use the Auth. Server screen (Section 43.12 on page 868) to configure the ZyWALL/USG to
operate as a RADIUS server.
•Use the CloudCNM screen (Section 43.13 on page 870) to enable and configure management of
the ZyWALL/USG by a Central Network Management system.
•Use the System > Language screen (see Section 43.14 on page 873) to set a language for the
ZyWALL/USG’s Web Configurator screens.
To Next Page
Loading...
